Auto Finesse Iron Out Contamination Remover – for removing industrial fallout and iron contamination

Auto Finesse Iron Out Contamination Remover 1000 ml is a highly effective, fast-acting cleaner for removing iron fallout, brake dust, and iron contaminants from all exterior surfaces of the vehicle. The product is equipped with a new, robust spray head, suitable for professional and intensive use.

Iron Out is among the most proven products in global automotive detailing and is designed to intensively decontaminate surfaces before iron particles begin to corrode and cause permanent damage. With increasing traffic and brake dust, microscopic iron particles embed themselves in the paint, wheels, and metal elements, where over time they cause rust and defects.

The product uses an advanced, pH-neutral reactive gel formula that targets only iron-based contaminants. Unlike aggressive acidic cleaners, Iron Out is safe for a wide range of materials while remaining extremely effective. The reaction is visualized by a color change to purple, and in cases of heavy contamination, to almost black.

Iron Out also contains degreasing agents that break down road film, as well as additives that slow down the re-adhesion of dirt, keeping surfaces clean for longer. This makes it an excellent choice for both wheels and brake calipers, as well as for complete paint decontamination before polishing or protection.

1. Ensure the surface is cool and dry.
   

2. Spray a fine layer of the product.
   

3. Allow to react – the product will change color to purple.
   

4. For heavy contamination, you can gently assist with a detailing brush (without aggressive scrubbing).
   

5.  

   Rinse thoroughly with water or a pressure washer.
   
   Tip: Don't forget the brake calipers – Iron Out also breaks down "baked-on" brake dust.
   

1. Wash the car with shampoo to remove standard contaminants.
   

2. Ensure the surface is cool and dry.
   

3. Spray a fine layer of the product.
   

4. Allow to react (purple discoloration will appear).
   

5. Rinse thoroughly without using cloths or brushes.
   

6. For heavy contamination – wash directly with a pH-neutral shampoo, without pre-rinsing.

Additional product information

RESPONSIBLE PERSON: MANUFACTURER: Auto Finesse Ltd 20 Burnt Mill Ind. Estate, Elizabeth Way, Harlow, Essex, CM20 2HS, United Kingdom support@autofinesse.com