Auto Finesse Iron Out Contamination Remover – for removing industrial fallout and iron contamination

Auto Finesse Iron Out Contamination Remover 5000 ml is a highly effective, fast-acting product for removing fallout, brake dust, and iron contaminants from all exterior surfaces of the car. The product is equipped with a new, durable sprayer, suitable for professional and intensive use.

Iron Out is among the most proven products in the global car detailing industry and is designed to intensely decontaminate surfaces before iron particles can start corroding and causing permanent damage. With increasing traffic and brake dust, microscopic iron particles embed themselves in the paint, wheels, and metal elements, where over time they cause rust and defects.

The product uses an advanced, pH-neutral reactive gel formula, which targets only iron-based contaminants. Unlike aggressive acid cleaners, Iron Out is safe for a wide range of materials while remaining extremely effective. The reaction is visualized by a color change to purple, and in case of heavy contamination – to almost black.

Iron Out also contains degreasing agents, which break down road film, as well as additives that slow down the re-adhesion of dirt, keeping surfaces clean for longer. This makes it an excellent choice for both wheels and brake calipers, as well as for complete paint decontamination before polishing or protection.

1. Ensure the surface is cool and dry.
   

2. Spray a fine layer of the product.
   

3. Allow it to react – the product will change color to purple.
   

4. For heavy contamination, you can gently assist with a detailing brush (without aggressive scrubbing).
   

5.  

   Rinse thoroughly with water or a pressure washer.
   
   Tip: Do not skip the brake calipers – Iron Out also breaks down "baked-on" brake dust.
   

1. Wash the car with shampoo to remove standard contaminants.
   

2. Ensure the surface is cool and dry.
   

3. Spray a fine layer of the product.
   

4. Allow it to react (purple coloration appears).
   

5. Rinse thoroughly without using cloths or brushes.
   

6. For heavy contamination – wash directly with a pH-neutral shampoo, without pre-rinsing.

Additional product information

RESPONSIBLE PERSON: MANUFACTURER: Auto Finesse Ltd 20 Burnt Mill Ind. Estate, Elizabeth Way, Harlow, Essex, CM20 2HS, United Kingdom support@autofinesse.com